Description for Ampoule Filling & Sealing Machine
Harsiddh Single head ampoule filling and sealing machine is used to fill and seal injectable liquids in glass ampoules. Sterile and injection liquids are packed with this device in pharmaceutical industries. Mainly the machine is applied in research and development laboratories and pilot plant for liquid injection development.
Filling and Sealing operations with ampoule filling & sealing machine is based on the principal of angle travel of ampoules. It takes cares of various parameters including thickness, neck dimension and quality of ampoules. It’s a great combination of flusher, filler and sealer. Traditional ampoule feed has been replaced with rectangular feeding system that is one of the important and highly demanded features in our system. This increases the stability of ampoules and prevents breakage.
Automatic feeding, transfer, pre-post nitrogen purging, material filling, heating and sealing are executed and controlled with this latest technological advanced machinery. The inbuilt feature “No Ampoule, No Filling” is comprehensive for costly materials to feed precisely without wastage. The mechanism is competent for 1ml to 25ml open mouth glass ampoules with 0.5ml to 25ml filling efficiency in single dose. The filled production can be achieved from 10 to 15 ampoules/min based on ampoule size.
- compact cGMP model .
- All contact parts are made from stainless steel AISI 316 material.
- single motor customized with all drives of the unit.
- A delicate ampoule rotating unit attached at the sealing station.
- Pre & Post nitrogen flushing unit.
- Pre heating unit for thick glass ampoules.
- Minimum change over the ampoule size.
- sleepy tray for diversion of filled and sealed ampoules.
- West tips collector made with the high quality stainless steal.
- Appropriate for all open mouth glass ampoules.
|Model No.||HFS-30 / Off Line Model>|
|Ampoule Sizes||1ml to 25ml Open Mouth Glass Ampoules>|
|Filling Capacity||From 0.5ml to 25ml in single dose >|
|Filling Type||Piston Pumps Type Filling (Volumetric)>|
|Contact Parts||Stainless Steel AISI 316L (For Filling Nozzle & Syringe / Pump)>|
|Output / Minute||10 to 15 Ampoules / Minute (Depend on ampoules sizes)>|
|No. of Head For Fill & Seal||One|
|Require Gases For Sealing||LPG & Oxygen (Mixture)>|
|Nitrogen Purging||Available (Pre & Post)>|
|Power Require||0.5 H.P., 380 Volts, 3 Phase, 50 Hz (4 Wire Systems)|
|Over All Dimensions||750mm (L) X 500mm (W) X 1000mm (H)|
|Net Weight>||70 Kgs.|
|Gross Weight (With Wooden Case)||180 Kgs.>|